[SharpMZ] mzfstool

[Michal Hucik - ORDOZ]

Ahoj,

udelal jsem win32 kompilovanec - pokud jej treba nekdo potrebujete 
http://duna.ordoz.com/mzfstool-win32/ 
<http://www.google.com/url?q=http%3A%2F%2Fduna.ordoz.com%2Fmzfstool-win32%2F&sa=D&sntz=1&usg=AFQjCNHNcKk9RA7XOVze0NICBsvoIwXa6g>

Michal


Dne 12.1.2016 v 17:54 Michal Hucik - ORDOZ napsal(a):
> Ahoj,
>
> naprgal jsem takovou drobnost pro praci s MZFS - tedy MZ-BASIC 
> filesystemem. Mam rozpracovane jeste dalsi formaty, tak to zatim 
> nechci davat na sourceforge.
> Zakladni knihovna je optimalizovana tak, aby ji bylo mozne pripadne 
> kompilovat i pro Z80.
>
> Prozatim jsem to kompiloval a zlehka testoval jen v Linuxu a driver na 
> Sharpu, ale ve widlich by s tim snad nemel byt problem - kdyz tak 
> dejte vedet.
>
> http://duna.ordoz.com/mzfstool/mzfstool_2016-01-12.tgz
>
> Tady je k tomu nejake povidani v moji čenglištině:
>
> Usage: mzfstool [options] <dsk_file> <command> [<command_params>]
>
> Options are:
>      --ro: forced read-only mode
>      --fixtrsz: bugfix DSK track sizes - if need (only in R/W mode)
>      --nocnv: disable Sharp ASCII conversion in block and trsec command
>      --help: print this help message
>      --version: print version
>
> Commands:
>
>      info
>           Print info about disc MZFS format.
>
>      showboot
>           Print info about MZFS IPLPRO bootstrap.
>
>      discmap
>           Print MZFS disc map.
>
>      dir
>           Print all dir items with ftype > 0x00 (not deleted).
>
>      dirtype <nn>
>           Print all dir items with ftype = nn.
>
>      file <name>
>           Print dir item by name.
>
>      id <id>
>           Print dir item by ID = <0; 63>.
>
>      ren <name> <newname>
>           Rename file by name to newname.
>
>      renid <id> <newname>
>           Rename file by ID to newname.
>
>      era <name>
>           Erase file by name.
>
>      eraid <id>
>           Erase file by ID.
>
>      clrboot
>           Clear IPLPRO block.
>           * For non MZFS disks with MZFS bootstrap track.
>
>      rmboot
>           Remove bootstrap loader from MZFS and clear IPLPRO block
>           * For full MZFS disks only.
>
>      getboot <mzf>
>           Save boootstrap loader into MZF file.
>
>      putboot <mzf>
>           Load MZF and install into generic bootstrap ( max: 0x0f00 
> bytes ).
>           * For non MZFS disks with MZFS bootstrap track.
>
>      mzfsboot <mzf>
>           Load MZF and install into MZFS bootstrap.
>           * For full MZFS disks only.
>
>      getfile <name> <mzf>
>           Save file by name into MZF file.
>
>      getid <id> <mzf>
>           Save file by ID into MZF file.
>
>      mzfsfile <mzf>
>           Load MZF file into MZFS.
>
>      block nn
>           Print hex dump from block nn.
>
>      trsec tt ss
>           Print hex dump from track, sector.
>
>      get <file> <block> [size]
>           Save data from block into local file.
>           * Default size is 256 bytes (block_size).
>
>      put <file> <block> [size] [file_offset]
>           Load data from local file into block.
>           * If size is 0 or is not set, then default size is file_size 
> - offset.
>
>
>
>
>
>
> _______________________________________________
> SharpMZ mailing list
> SharpMZ na mail.ordoz.com
> http://mail.ordoz.com/mailman/listinfo/sharpmz


------------- další část ---------------
HTML příloha byla odstraněna...
URL: http://mail.ordoz.com/pipermail/sharpmz/attachments/20161103/9a94e2b6/attachment.html